meta data for this page

Back to the General Menu

AccuCampus Mobile App Guide (Faculty)

These settings might be different than the ones in your AccuCampus app because of permissions that your administrator chose.

Roll Call

Faculty members are now allowed to take attendance on the AccuCampus mobile app.

To do this they can follow these steps:

  1. Go to the Navigation Menu tap on the three lines on the top right corner.
  2. Tap on Roll Call under Class Attendance.
  3. Tap on the course you would like to take attendance for.
  4. Start taking attendance.


To set the same status to the whole class do the following:

  • Tap on the upper right corner to select the status.
  • Choose status and click on Apply to All.
  • This will set that status for every student.

look at the example below:



To start taking attendance manually you must do the following:

  • Tap on the upper right corner to select the status.
  • Choose status and click on Done.
  • Select the student(s) that you would like to set that status.

look at the example below:




View/Edit Attendance

Faculty members can also view & edit the students' Attendance on the AccuCampus mobile app.

To do this they can follow these steps:

  1. Go to the Navigation Menu tap on the three lines on the top right corner.
  2. Tap on Student Attendance under Class Attendance.
  3. Tap on the course you would like to view the attendance for.
  4. Tap on the student you would like to view the attendance for.

View Action Plans

Faculty members can also view the students' Action Plans on the AccuCampus mobile app.

To do this they can follow these steps:

  1. Go to the Navigation Menu tap on the three lines on the top right corner.
  2. Tap on All Plans under Action Plans.
  3. Search or select the student you would like to view the action plan for.
  4. Select the action plan you would like to view (the gear button at the top help you filter the action plans shown)

Edit Profile

This Action might be prohibited by the permissions your admin gave you

To Edit your profile follow these steps:

  1. Go to the Navigation Menu tap on the three lines on the top right corner.
  2. Tap on My Account under AccuCampus.
  3. Edit or add content to your profile.
  4. Tap on Save when finished.

Sync Device

Synching your device is very important, you should do this regularly so that any changes made can be updated on the app

To Sync your device follow these steps:

  1. Go to the Navigation Menu tap on the three lines on the top right corner.
  2. Tap on Sync under AccuCampus.
  3. Wait until a message appears at the bottom of your screen titled Sync completed!.

Sign Out

To log out of the AccuCampus app follow these steps:

  1. Go to the Navigation Menu tap on the three lines on the top right corner.
  2. Tap on Logout under AccuCampus.
  3. Wait until you have successfully been signed out.

How to create quizzes

1-Open the AccuCampus APP and go to the Quizzes section, to see all of them click on “Quizzes”:

2- In the Quizzes list you have the option to see the Quizzes you have built by clicking “Mine”, you can see all the quizzes that you have ever worked with if you click the “All” option, or you can see all publicly available quizzes if you click the “Search ” option, all these options are located at the bottom of the quizzes list:

3- To edit an existing quiz click on the name in the list and then click on the three dots at the bottom to access the “Edit”, “Remove” and “Visibility” options:



4-To create a “New Quiz Screen” OR “edit” a quiz already created you would need to follow the same steps(the edition will come with pre-loaded data):

Set a name and description for the quiz, then under category click the + sign to either create a new category or select one that is currently active in the system(you might need extra permissions to create a new category).


5-For this example, we are creating a new category called “U.S Modern History”, click on Done when you are finished:


6-Now that all the basic information for the quiz is complete we need to start adding as many questions as we want by clicking “Add question”:


7-For the question page, we start by : -Add the question at the top. -Add an image if you like in reference to the question (this is optional and it is highlighted in green in the next screenshot). -Set the time limit that the user has to answer. -Set the selection mode between Single or Multiple: -Click on at least 2 and a maximum of 4 possible answers and assign a value to each one and an explanation OR click on “answer with an image” to attach an image which will work as a response to the question (depending on the question), the options that are valid answers need to be marked as such:



8-In order to test the quiz in “Study Mode” go to the Quizzes section of the app and quick “Quizzes”, now select the quiz from the list, choose “Study” :


If you choose “Study” you will see the question and have the option to “Study Again” to re-stack the cards, “Flip Card” to see the response, click “Got it” to move to the next Card, you can also drag the card to the left or right to keep it for later and continue asking the next question, or drag it up to signal you “got it” :


9-In order to test/use the quiz in “Play Mode” go to the “Quizzes” section of the app and quick “Quizzes”, now select the quiz from the list, now you can specify “Play”:

If you choose “Play” you will see the question and have the option to select one or many of the responses in a certain amount of time:


Either you fail or succeed you will see messages referring to the outcome and the right and wrong options:


A final scoreboard is also shown:


How to configure and play with Quizzes

1- Login to the AccuCampus APP and go to the quizzes section:


2-Select a quiz from the list:


3-Click on the “Learn” link at the bottom:


4-In the “Study” section, you can click on AccuCards to see each card and practice to start answering the question as a practice run, in the “Play” section you can choose “Single Mode” to run the questions for your, for multimode play click on “Challenge” or “Host” so you can configure the multimode process as explained in next chapter:

5-Multiplayer- Challenge Mode -Select the Challenge mode to configure the Audience: Everyone, Group, or Course(if you select Group or Course an additional option will ask you to search/select from a list) -Select the availability: This is the range from StartTimeto EndTime that the challenge will be available for. -Select the Scoreboard: select when do you want to show the scoreboard: In the end, After each question, Never. Choose Public if you want the scoreboard to show other user's score, otherwise choose private. -Click “Create”:

6-Here you can see the PIN that you need to send to other players to join the challenge:

7-Now that PIN allows others to join and start the challenge:
Each player uses the PIN:

8-Now each user will start answering the questions and the system will show the scoreboard:

9-Multiplayer- Host Mode:


10–Select the Host Mode to configure the Audience: Everyone, Group, or Course(if you select Group or Course an additional option will ask you to search/select from a list). Select the Scoreboard: select when do you want to show the scoreboard: In the end, After each question, Never. Choose Public if you want the scoreboard to show other user's scores, otherwise choose private.


11-Now you have access to the PIN to be used to start the Host Mode play:


12-As users join you see a list like this, whenever ready click “Start”:


13-Participants will start answering the questions and you will get a scoreboard usually at the end(or when it was configured):

Back to the General Menu